>>> e ji mara

1.Controlled site ulo oru kọmputa na ozugbo, Windows sistemụ.
2. Oil ibu tụrụ site mmetụta na egosipụta na 19 "LCD
3. Data nwere ike chọọ, nke e biri na mere n'ime nchekwa data.
4. Ọ nwere ike inye 0 ~ 2000 mmanya nke okporo ígwè nsogbu.
5. Oil temperatue na-achịkwa kọmputa
6. Drive mgbaàmà nwere ike na-achịkwa.
7. Protection ọrụ nke na-adịghị circuit.
8. Okporo ígwè mgbali nwere ike nwalere na ozugbo, o nwere elu-mgbali nchedo ọrụ.
9. usu ma ugboro nke injector drive mgbaàmà nwere ike gbanwere.
10.Injection oge nwere ike setted.
11.Precise n'ihe, mfe ọrụ, ala mkpọtụ.
12. mezuo remote aka site internet na eme mmezi mfe iji rụọ ọrụ.

>>> ọrụ
Common Okporo ígwè Injector Common Okporo ígwè mgbapụta
1. Test ụdị: Bosch, Siemens, Delphi, DENSO. 1.Test ụdị: Bosch, Siemens, Delphi, DENSO.
2. Test 4 iberibe nke injectors na a oge.
(6 na-dịnụ-ịnara ọrụ) 2.Test abụọ plunger HP0 mgbapụta nke
DENSO- (nhọrọ ọrụ)
3. Test tupu ogwu ogbugba nke elu-mgbali nkịtị okporo ígwè injector. 3. Nwaleenụ akara nke nkịtị okporo ígwè mgbapụta.
4.Test na max. mmanụ nke ukwu nke elu-mgbali nkịtị okporo ígwè injector 4. Test esịtidem mgbali nke nkịtị okporo ígwè mgbapụta.
5. Test na cranking mmanụ ukwu nke elu-mgbali nkịtị okporo ígwè injector. 5. Test na proportional akpa valvụ nke
nkịtị okporo ígwè mgbapụta.
6. Nwaleenụ na backflow mmanụ ukwu nke elu-mgbali nkịtị okporo ígwè injector. 6. Nwaleenụ ndenye mgbali nke nkịtị okporo ígwè mgbapụta.

7. Nwaleenụ nkezi mmanụ ukwu nke elu-mgbali nkịtị okporo ígwè injector. 7. Nwaleenụ na agbanwe agbanwe oge nke nkịtị okporo ígwè mgbapụta.

8. Test elu-mgbali nkịtị okporo ígwè injector si injection ala na mmanụ ibu n'ihe. 8. tụọ okporo ígwè mgbali na ozugbo.

9. Data nwere ike chọọ, nke e biri na mere n'ime nchekwa data. Data nwere ike chọọ, nke e biri na mere database.

>>> ụzụ oke
Ọgwụ ule ugboro: 50 ~ 3000 rpm
usu obosara: 0,1 ~ 200 MS
n'ihu injection ugboro: 0 ~ 1000
Mmanụ okpomọkụ: 40 ± 2 ℃
Tụkwasịnụ mmanụ ibu nkịtị okporo ígwè injector: 0 ~ 200cc / min 0,5%
Okporo ígwè elu nsogbu: 0 ~ 2000 mmanya
Test mmanụ ẹdụk nkenke: 5μ
Input ike: 380V / 50hz / 3phase ma ọ bụ
220V / 60hz / 3phase
adiana ọsọ: 0 ~ 4000RPM
Oil tank ikike: 60L
Flywheel inertia si oge: 0.8KG.M2
Center elu: 125MM
mmepụta ike: 7.5KW (11kw, 15kw, 18.5kw dị ka arịrịọ)